Digital camera battery saver Dafa
1, To avoid the frequent use of flash: If you are not a professional photographer who, then, except in the invisible fingers of the night, normal daytime light intensity for the average digital camera for sufficient.
2, As far as possible to avoid unnecessary operation of the zoom: zoom the camera lens Yi Shen a shrink, very power. You can move the pace of hyperactivity, use the "manual zoom" approach to replace the "camera zoom" in order to save power.
3, Do not let the screen has been lit: If power limited circumstances, can turn off the LCD screen, with screen viewfinder to adjust the composition, for example a digital camera, LCD should be considered as the most power-hungry components, general digital camera, close the LCD screen can be used time after the original duration of the three-fold.
4, Less shooting and video: minimize the use of multi-shot and dynamic image video capture function, because the completion of these features is to use the built-in buffer body to temporarily save the screen shot, the power consumption a lot.
5,Avoid frequent opening and shutdown: Many users know that has been lit display is power, so in use to save electricity, the frequent opening and shutdown. In fact, frequent open, shut down the electricity wasted consumption than bright display even more, especially for larger diameter lenses, but also require a substantial stretch of the camera, the switch machine is power. Most digital cameras have auto-shutdown option, this setting should not be set too short, otherwise easily lead to frequent open, shut down. Of course, frequent artificial opening, shut down should also be avoided.
6, Optical image stabilization Wu Chang-Kai: optical image stabilization is through driving the lens or image sensor components is offset by video and photo material relative motion between the sensor achieved. No matter what kind of optical image stabilization mode, would lead to a small power consumption, in particular, some models can be Anti-Shake mode is set to "always open" so that the power loss caused by will be more severe. To this end, we have a good scenarios in the light should be shut down optical image stabilization feature, you must use should also be less "always open" mode.
Above is some advice about how to saver dafa for digital camera batteries for your best needs.